Why the machining accuracy of pin and socket becomes worse

　　The precision of the pin and socket of the hardware parts basically determines the quality of the product. The more precise the hardware part is, the higher the precision requirement will be. So why does the precision of the pin and socket become worse? Now let's talk about it

　　The first factor is the poor machining accuracy of the part pin socket itself: Generally speaking, if the dynamic error between shafts is not adjusted properly during installation, or because the shaft drive chain changes due to wear, the accuracy of the parts will be affected. Generally speaking, the accuracy deviation caused by this kind of error can be solved by readjusting compensation. And if the error is too large, even if an alarm is given, it is necessary to check the servo motor and observe whether its speed is too high.

　　The second factor is that if the machine tool is in operation, if it is overshoot, the machining accuracy will be affected: the acceleration and deceleration time may be too short and the change time will be appropriately extended. Of course, it is also possible that the link between the lead screw and the servo motor is loose.

　　The third factor is the roundness out of tolerance caused by the linkage of the two shafts: the axial deformation of the circle formed by the mechanical adjustment is not good, the gap compensation of the shaft lead screw is not correct or the shaft positioning is offset, which may affect the precision of the pin socket of precision parts.

　　Shenzhen Witchip Electronics Co., Ltd. was established in 2004 and is located in Longgang District, Shenzhen. It has an independent factory building with an area of approximately 6,800 square meters. Integrating research and development, manufacturing, and sales, it is mainly engaged in the research and development and production of various POGOPIN and POGOPIN connectors, shrapnel terminals, and CNC automatic lathe parts. It can also be produced and processed according to customer samples. There are more than 4000 product categories for customers to choose. The products are widely used in various electronic products such as drones, smart robots, smart wearable products, 5G communication products, smart home products, education/entertainment electronics, medical equipment products, automotive electronics, mobile phone consumer electronics, etc.

　　The company’s R&D and designers are experienced engineering technicians with nearly 20 years of experience in the industry. The total number of employees is 120, with 80 CNC lathes, 100 automatic lathes, 80 assembly equipment, and projectors. Salt spray tester, life tester, current tester, high temperature tester, load dynamic impedance tester. In order to comply with the demand for market quality

　　The company passed the ISO9001 quality system certification in 2007 and successively passed the ISO14001 environmental system certification in 2009. It has 8 independent patents, which provide a solid guarantee for quality and delivery.

　　The company has always maintained a leading advantage in the field of Pogopin connector products, adhering to the business philosophy of "gratefulness, innovation, and creating value for customers", and has been recognized by some well-known companies at home and abroad, becoming their excellent connector supplier. Continuously win the trust of customers with quality and service, and establish a good reputation.

Read recommendations:

M1191 2.00x7.60(1A)

M1821 2.3x10.5(1A)

probe M232 2X2.2

Wanchang analyzes the abnormal gold plating of pogopin connector on spring pin

Three core factors affecting IC sockets