Precautions for spring pin connector inspection

　　In order to ensure the normal operation of the RF connector, the RF connector is easy to be broken within a certain service cycle. It is particularly critical to carry out a safety inspection. The following describes the matters that must be paid attention to in the whole process of RF connector inspection:

　　1. The inspection of RF connector must be carried out under the condition that the ignition switch has been turned off, otherwise the relevant electrical components will be damaged due to the current self inductance or short circuit fault.

　　2. When removing the wire connector, the interface mode of the RF connector should be observed first; the RF connector can be disassembled only when the clamping spring yellow is loosened or the buckle lock is pressed, and it is forbidden to pull hard. When installing, the RF connector should be inserted to the end in the reverse way and locked at the same time.

　　3. For some moisture-proof wire connectors to be removed for inspection, attention should be paid to take down the leather cover carefully to prevent damage to the actual effect of moisture-proof; when reassembling, the moisture-proof suit must be put in time. Otherwise, the circuit failure will be caused by water entering the RF connector.

　　4. When using digital multimeter to check RF connector, do not use too much force on metal material terminal when inserting the meter rod, so as to prevent deformation and looseness.

　　Shenzhen teke Hanze Precision Electronics Co., Ltd. was founded in 2007. It is a high-tech enterprise with precision connection as the leading factor, technology development as the core, and R & D, production and sales as one. Our main products are: pogo pin, pogo pin connector, magnetic connector, magnetic charging data line. Our products are widely used in intelligent wear, mobile communication, digital camera, automobile, medical equipment and other fields.

　　Our technology research and development, product innovation has been in the forefront of market development. In addition to expanding the sales market in mainland and Taiwan, some products are also exported to North America, Western Europe, South Korea, Japan and other regions. Hanze's goal: to create a world-famous brand, to create the largest and most professional magnetic connector manufacturing base in China.

　　In the new century, Hanze people will take the revitalization of pogo pin industry as their own responsibility, set up the first brand of magnetic connection industry as the goal, continue to take their own down-to-earth attitude, with diligence as oar, with wisdom as the rudder; continue to make every effort to provide high-quality products and perfect services for new and old customers.

　　Shenzhen Witchip Electronics Co., Ltd.

　　Shenzhen Witchip Electronics Co., Ltd. was established in 2004 and is located in Longgang District, Shenzhen. It has an independent factory building with an area of approximately 6,800 square meters. Integrating research and development, manufacturing, and sales, it is mainly engaged in the research and development and production of various POGOPIN and POGOPIN connectors, shrapnel terminals, and CNC automatic lathe parts. It can also be produced and processed according to customer samples. There are more than 4000 product categories for customers to choose. The products are widely used in various electronic products such as drones, smart robots, smart wearable products, 5G communication products, smart home products, education/entertainment electronics, medical equipment products, automotive electronics, mobile phone consumer electronics, etc.

　　The company’s R&D and designers are experienced engineering technicians with nearly 20 years of experience in the industry. The total number of employees is 120, with 80 CNC lathes, 100 automatic lathes, 80 assembly equipment, and projectors. Salt spray tester, life tester, current tester, high temperature tester, load dynamic impedance tester. In order to comply with the demand for market quality

　　The company passed the ISO9001 quality system certification in 2007 and successively passed the ISO14001 environmental system certification in 2009. It has 8 independent patents, which provide a solid guarantee for quality and delivery.

　　The company has always maintained a leading advantage in the field of Pogopin connector products, adhering to the business philosophy of "gratefulness, innovation, and creating value for customers", and has been recognized by some well-known companies at home and abroad, becoming their excellent connector supplier. Continuously win the trust of customers with quality and service, and establish a good reputation.

Read recommendations:

Probe

M1249 2.90x15.10(1A)

M12711.60x7.20(3A)

Manufacturing process of different types of spring signal needle shaft

How do pogopin thimble manufacturers show their advantages in the competition?