What are the ways to fix the connector pins

　　There are many pins on the connector, and the pins of the connector are mainly used to connect to related equipment. Therefore, the pins of the connector are very important. In order to ensure that the pins are strong and stable, which methods should be used?

　　1. Connector pin press-in type:

　　The pin is fixed by forced pressing.

　　1. The pin installation is simple, the insulated wire does not need to be stripped, ensuring a good electrical connection without damaging the wire.

　　2. There is no need to return the cable to save the investment in the cable.

　　3. There is no need to cut off the main cable, and it can be tapped at any position of the cable.

　　4. Low cost and minimal installation space requirements.

　　5. The connector is completely insulated, and the cable branch can be made without stripping the cable insulation.

　　2. Connector pin epoxy type:

　　After perforating the insulator and shell, use epoxy resin to fix the pins.

　　1. Strong chemical resistance, acid, alkali and organic solvent resistance.

　　2. Low molding shrinkage, good dimensional stability, and low cracking probability.

　　3. Excellent mechanical properties and heat resistance.

　　4. With high bonding strength, it is very suitable for plastic case packaging of products with inserts and coils and electronic devices.

　　5. Excellent electrical performance, can be used as high-frequency and high-voltage insulation materials, arc resistance and surface leakage resistance are stronger than ordinary insulation materials.

　　3. Connector pin point riveting type:

　　After pressing in, point riveting the shell to fix the pins.

　　1. Simple structure, high reliability, and a cost-effective permanent fixed assembly method.

　　2. The assembled metal components are firm, compact and stable, have high impact resistance and corrosion resistance, earthquake resistance and strong weather resistance.

　　3. The processing process has no vibration, no pollution, no noise, environmental protection, energy saving, fast, efficient, high-quality and beautiful.

　　4. It can be fixed by riveting at multiple points without adding any adhesives, solvents, fillers and fasteners, low energy consumption, compact equipment and small footprint.

　　The stability of the connector pins is very important. It is necessary to strictly check whether the pins are completely fixed to prevent unnecessary problems during use. Therefore, we must pay great attention to it.

Read recommendations:

M736 2.5X6.5

M1929 2.0x10.5(1A)molecular probe Vendor

M1857 4.2x42.55(1A)

Factors affecting the service life of pogo pin spring pin connector

Advantages of electroplating antenna thimble connector