The use, maintenance method and production process of Pogo pin

　　The use, maintenance method and production process of Pogo pin

　　Pogo pins are used in a wide range of fields

　　1. Aviation, aerospace, military communications and military electronics.

　　2. Automobile, car navigation, test and measurement equipment.

　　3.Medical equipment, wireless equipment, data communication equipment, telecommunications equipment, automation and industrial equipment.

　　4. Consumer electronics (printers, mobile phones, computers, cameras, audio-visual equipment, PDAs, Bluetooth headsets, etc.)

　　5. Smart wearable devices, smart positioning devices, children's smart bracelets, smart watches, smart robots, drones, wearable phones, Bluetooth headsets, etc., data cables, charging cables, magnetic wire end connectors.

　　The pogo pin is mainly used as a link, and its application is very wide, ranging from aerospace equipment to small mobile phone antenna thimble, so its role is very large, in order to make the pogo pin work better and have a longer service life , We need to take good care of the pogo pin, so how to maintain the pogo pin?

　　1. Pay attention to some problems during use, so as to better extend the life of the connector. The battery contacts or FPC golden fingers that are paired with the connector should not be dirty, oxidized, etc., residual sealing liquid, and other dirt. To ensure that the surface is clean and tidy for dirt residues, etc.

　　2. When moving or moving, avoid contacting the connector with hard objects to avoid scratching the connector. When stacking the product, do not place it under heavy objects to avoid crushing the connector.

　　3. In the usual storage process, it is necessary to ensure that the room has a suitable temperature and humidity. Excessive temperature or humidity will have a certain impact on it, and do not store the pogo pin together with some chemical products. It will corrode to a certain extent, so that its outer surface layer will lose its protective measures, causing certain damages and affecting functional use.

　　What is the production process of pogo pins?

　　Pogo pin processing: the most advanced and confidential machine tool is used to process pogo pins, and the processed parts must meet quality standards.

　　Pogo pin electroplating: This is also a very important part, to ensure that the gold plating in the hole is good, without blackening, discoloration and poor plating.

　　Pogo pin quality inspection: After the processing is completed, the quality department will check each pogo pin pogo pin to see if there is any difference in appearance and whether the spring has elasticity, etc.

　　Batch inspection and shipment: Before shipment, a batch of qualified products will be selected for testing, and the products will be shipped only after there are no problems in the testing.

Read recommendations:

M1390 10.00x20.00(1A)

M1903 2.0x3.1(1A)

M3011 1.5x3.8(1A)radioactive probe Vendor

Probe head rapidly increases WLCSP test throughput

What is the problem of unstable current when using pogo pins?