How to prevent bad elements from occurring in round hole pin headers?Antenna thimble price

　　How to prevent bad elements from occurring in round hole pin headers?

　　You will certainly not be unfamiliar with the round hole pin header. It is one of the connector categories, which has a great demand in the electronic device sales market and has a wide range of main uses. In order to make the round-hole pin-and-female connector more robust in electronic products, it is necessary to select an appropriate operation method to reasonably avoid the occurrence of undesirable elements.

　　When installing the female connector with round hole pin header, if you find that the pin header is insufficient, please select and replace it immediately. Otherwise, the use of the pin header connector is very simple to present common faults and other problems. It should be noted that the female female connector with round hole pin header cannot be reversed or shifted during the whole use. If the plug is not smoothly inserted, it cannot be forced to pull out to avoid damage to the pin header.

　　If you use a large number of rows of round-hole pin header connectors, for the connection between the header and the header, you should pay attention to whether the two ends of each header are aligned with the pinholes of the header. Otherwise, if the two ends are not aligned, once the lamp wire is connected, It is very simple to form a bent sheet metal pin header.

　　In the actual operation of the round hole header and female header, you should slowly insert the round hole header and header, especially when pulling out the header, do not perform the actual operation too hard, so as not to damage the needle angle, pay attention Try to ensure that both sides of the pin header can go out together.

　　If the round hole pin header is used for too long, the dust in the pin hole of the header should be removed frequently. Because once the dust accumulates too much, it will lead to poor contact between the header and the header. In the use of the header and header, there will be some current or unstable data signal transmission.

Read recommendations:

M1483 2.00x5.10(1.5A)nucleic acid probe Processing

M734 1.9X24

M2250-1 2.8x10.0(3A)Bending needle series factory

How to install pogo pin!Through Hole Pogo Pin price

Teach you how to improve the quality of spring pogopin.sewing thimble Merchant