How is the round hole pin header connected?radioactive probe company

　　The extra voltage of AMP round hole header for electrical functions is 250VAC, and the maximum current is 7.5A. AWG18 to AWG22 wires with a maximum insulation diameter of 0.118 inches are suitable for socket contacts. The initial resistance is 10mΩ, after all, the resistance is 20mΩ. Durability up to 50 mating cycles. The product can be used in conjunction with other similar planned products. At the same time, the product also has high-standard one-bit socket and pin socket types. This type of current carrying can be increased to 8A. The product complies with ELV and RoHS specifications, and is suitable for lead-free processing skills. SMD connector　This AMP round-hole female header is equipped with a determination device to ensure a useful connector determination. The orientation of the determining pin avoids the disturbance of the potting or other surface treatments on the circuit board of the household appliance. Pin holders are selected in a compact plan to complete stacking side by side, which helps advance the flexibility and density of printed circuit boards. The 0.156 inch and 0.200 inch types of the product provide 2 to 12 wiring directions, and the 0.312 type provides 2 to 5 wiring directions. Products with a distance of 0.156 inches and 0.200 inches are available in 2 to 12 positions, and products with a distance of 0.312 inches are available in 2 to 5 positions.

　　The utility model relates to a supplier of round hole female row females. The insulating seat body of the connector connector supplier is provided with a wire receiving groove for preset wire placement and positioning, and the insulating seat One side of the body is constituted with a joint for mating with an external connector, and a plurality of suppliers of contact terminals positioned around the joint are provided on the joint, and one end of each contact terminal is provided with an insulating seat body through the insulating base and into the wire receiving groove The welding part connected with the preset wire is characterized in that the plurality of contact terminals have a transverse U-shaped shape, and the bottom of each contact terminal is provided with a welding part positioned on the inner surface of the wire receiving groove with a long distance. The contact terminal is also provided with a contact part which is bent upward and reversely and surrounds the periphery of the joint, and one end of the contact part is connected with the welding part. With this structure plan, the height of the connector can be effectively reduced, the contact terminals are fastened firmly, the contact area is easier to grasp, the contact effect is outstanding, and the effect of low impedance can be achieved.

Read recommendations:

M581 1.8X8.4

M1171 4.80x13.00(0.5A)

M1493 10.00x24.00(5A)anode electrode Vendor

Different pogopin structures.6pin pogopin price

The principle and application scope of the pogo pin in the magnetic data cable