RF Pogo Pin thimble process requirements.zinc electrodes Vendor

　　1. One of the radio frequency pogo pin thimble, volume

　　The larger the volume and diameter of the pogo pin thimble, the more material it consumes. Of course it will be more expensive. If the pogo pin thimble product is too small and the accuracy requirements are too high, the price will increase.

　　2. RF pogo pin thimble process requirements

　　For example, a pogo pin thimble with a length of 2.0mm and a single needle with a diameter of 1.5mm are standard. This price is the cheapest if the needle has no special treatment. If a puncture needle is required or special skills are required, the price will increase. There are many types of pogopin thimble needles, such as double-sided single needle, tail single needle, side welding single needle, surface mount single needle, and surface mount single needle is the cheapest.

　　3. Electroplating of radio frequency pogo pin thimble

　　The electroplating of pogo pin thimble is a very important process. When pogo pin thimble is applied to different products, the requirements for electroplating are different. When customers require products that can withstand large currents, a thicker layer of gold must be plated to meet customer product requirements. As long as the pogo pin thimble is gold-plated more than 3U, we will gold-plated the pogo pin thimble. Of course, the price of the pogopin thimble with a thicker gold layer is relatively high.

　　Fourth, RF pogo pin thimble assembly

　　Pogo pin thimble can be assembled into various shapes. For example, some are directly riveted into plastic components, and some require caps based on them. Different assembly methods, different prices.

Read recommendations:

M504 2.8X7.8

M1930 2.7X17.8(2A)Elastic electrode Merchant

M1113 2.80x6.60(1A)Contact pin Merchant

How to use a fiber fast connector?

The usefulness of the spring thimble