Where the spring signal pin is used.level electrode Processing

　　There are many types of pogo pins in the industry and life, and they are also called pogo pins, pogopins, thimbles, charging pins, etc. The sales area is mostly in Guangdong. It is a special connector. Its basic structure consists of a rotating needle tube, a rotating needle and a compression spring. The edge of the needle tube mouth is curled, and the needle is kept in the needle tube. The contact force is provided by the spring to establish the electrical connection between the needle and the mating part. Connection, has a great electrical connection function. Moreover, it is a component that our electronic engineering and technical personnel often contact. Its function is very simple. The circuit between the bridges is blocked to make current flow. It is an indispensable part of electronic equipment; if you observe along the path of current flow, One or more spring signal pins will always be invented.

　　Its methods and structures are diverse. With the difference of application tools, frequency, power, application situation, etc., the connection methods are also various. For example, the pogo pin used in a mobile phone is very different from the pogo pin of a hard disk drive and the smart wear pogo pin. However, no matter what kind of pogo signal pin, it must ensure the smooth, continuous and solid flow of current. In terms of versatility, the pogo signal pin is not only connected to the current, but also very important in the rapid development of optoelectronic technology.

　　Imagine what it would look like without a spring pin connector. In this case, the circuit should be durable with a tail with a continuous conductor. For example, if the electronic device is to follow the tail of the power source, the ends of the tow wire must be firmly welded to the electronic device and the power source (such as welding). In this way, whether it is production or use, it brings great inconvenience to the connector, so it is very necessary for the stability and normal operation of the connector. Secondly, the production process has been improved and the assembly process of electronic products has been simplified.

Read recommendations:

M1357 1.80x9.50(3.5A)

M509 3X15.8

M612 3X28

Introduction to storage of board-to-board connectors!Antenna probe company

Some precautions when applying spring thimble