Location: Home > Other information > pogo pin > 
spring thimble pogo pin

Analysis of the common card pin problems of pogopin pogo pins.E-cigarette pogo pin

source:pogo pin release time:2022-04-02 Article author:sznbone Popular:POGO PIN

  


  In the use of pogopin, some customers will encounter problems such as the pogo pin compression is not smooth, the card pin is seriously bad, the preload is not smooth, and the needle cannot work normally.

  Common reasons can be analyzed from the following aspects:

  1. There is solid glue plugging the nozzle, which causes the needle shaft to be unable to be pressed normally.

  2. There is colloid blocking the nozzle, causing the pin to be stuck. (Some manufacturers of pogopin have a process environment with glue in the process of riveting and pressing)

  3. There are debris or debris stuck in the internal spring during the production process.

  It is necessary to pay attention to the manufacturing process of the pogo pin manufacturer, and pay attention to the control of the process link with glue to prevent the glue from contacting the pogopin, and choose a pogopin manufacturer with strong production capacity.


Read recommendations:

M142 2X9

M734 1.9X24

M1499 2.00x2.70(1A)

The development direction and industry requirements of pogo pin connectors.smt pogo pin

How Test Probes and Probe Sockets Work!

86-755-89900596