How to install the flat bottom pogopin pogo pin

　　The pogopin pogo pin has various shapes and structures, and the most common one is the flat-bottomed structure. A picture shows you how to use the pogopin pogo pin:

　　Advantages of pogopin flat-bottomed structure: It can be welded automatically by SMT method; it can be used for male-female & PCBA transfer in small space.

　　Good stability, the bottom of the needle tube is a flat bottom design, which is easy to be welded with the PCB board, and it is packaged in tape and reel and welded by SMT. Depending on the size, it can be used for charging and signal transmission.

　　Disadvantages of the flat-bottomed pogopin: the quantity is large, and the cap needs to be added; the space is limited, and the current cannot be too large when used for transfer.

　　There are five common packaging methods for pogopin pogo pins:

　　1. PE bag: small turned parts, a small number of pogopin

　　2. Blister box/disk: Bending type products, or customized requirements

　　3. Plastic box: bulk pogopin

　　4. Tape tape and reel packaging: SMT mounting products are required, etc.

　　5. Cap: For some pogo pins, a cap device needs to be added

Read recommendations:

Power contact thimble M635 2.7X26.4

5pin pogopin price

Receiving signal thimble

The main four uses and advantages of connectors.Connector Production

What are the specifications of chip test probes? Are they used frequently?