Pogo pin production process mature design structure and practical

　　1. Turning: Select the copper rod and add it to the feeding tube of the knife feeder and fix it. The parts produced by the car need to be measured against the drawings to confirm whether the parts meet the size and tolerance requirements, and observe through a microscope whether the appearance...

　　2. The entire column of needle tubes: Pour an appropriate amount of needle tubes into the column frame, set the machine parameters, then put the column frame into the column machine and press the green start button to fix the column frame, and the machine vibrates to make the needle tube fall into the hole.

　　3. Spring alignment: Pour an appropriate amount of spring into the spring alignment plate, then hold the spring plate and the alignment frame back and forth to make the spring fall into the hole

　　4. Needle alignment: Pour an appropriate amount of needles into the alignment plate, then hold the needle plate and the alignment frame and shake back and forth to make the needles fall into the holes

Read recommendations:

M2801 1.8x9.0(1A)Spring electrode company

M2702 1.5x4.5(1A)Spring contact needle Manufacturing

M1408 2.00x7.75(3A)

What are the manufacturer standards for spring thimble connectors?cnwitchip.com

Board-to-board pogopin connector usage requirements and how to troubleshoot hidden dangers！pogopin