Poor quality analysis of common pogo pins

　　1. The pressing needle is not stuck properly

　　Bad causes:

　　a) Poor shrinkage of riveted finished products. b) The inside of the needle hole is rough. c) Multiple springs

　　2. Poor spring shortage

　　Poor structural design

　　3. Pogo momentary failure

　　Poor needle/needle contact, too large clearance

　　4. Pogo pin thermal failure

　　wrong spring structure, design problem

Read recommendations:

M772 6X15

M1198 2.5x35(1A)nucleic acid probe factory

M2961 3.5X12.5(6A)Data line spring needle Wholesale

Application of spring pogo pin connector to solve portable design situation

pogopin performance test project,titanium electrode Vendor