spring loaded magnetic pogo pin connector

　　What causes the pogo pin connected device to not charge?

　　There may be many reasons why the pogo pin connected device cannot charge.

　　On the one hand, the quality problem of the pogo pin itself is one of the common reasons. If the pogo pin's spring elasticity is insufficient, it may cause poor contact and fail to transmit current stably. The spring may experience fatigue, deformation and other problems after long-term use, affecting its elastic performance. In addition, if the pogo pin's needle is worn, deformed or oxidized, it will also affect its contact effect with the charging interface. For example, needle wear may cause a decrease in contact area and increase in resistance, thereby affecting the transmission of charging current. Oxidation will reduce the conductivity of the needle, which will also cause charging problems.

　　On the other hand, the interface problem of the charging device may also cause the charging to fail. If there is dust, debris, etc. in the charging interface, it will hinder the good contact between the pogo pin and the interface. These impurities may increase the contact resistance and even cause a circuit break. At the same time, if the charging interface is loose or deformed, it will also affect the connection stability of the pogo pin. For example, a loose interface may cause the pogo pin to shake continuously during charging, resulting in poor contact.

　　Furthermore, the failure of the charging cable or charger may also affect the charging effect. If there is a problem such as a broken circuit or short circuit inside the charging cable, or the voltage and current output by the charger are unstable, the pogo pin connected device may not be charged. In addition, environmental factors may also affect charging. For example, in harsh environments such as high temperature, low temperature, and humidity, the performance of the pogo pin may be affected, resulting in charging problems.

　　In short, the failure of the pogo pin connected device to charge may be caused by a variety of reasons such as the quality problem of the pogo pin itself, the interface problem of the charging device, the failure of the charging cable or charger, and environmental factors. When encountering charging problems, you need to check these possible reasons one by one to find a solution to the problem.

Read recommendations:

M2922 7.0x8.9(1A)Screw Pogo Pin price

M1084 1.6x14 (1A)

Charging pogo pin M057 3.5X8.08G RF Pogo Pin Processing

What to pay attention to when using the round hole pin header connector!Negative contact pin Wholesa

Factors affecting the service life of pogo pin spring pin connector