the materials and development trends of electronic connectors!radioactive probe company

　　Electronic connectors are also often referred to as circuit connectors. Electrical connectors connect two conductor bridges on a road so that current or signals can flow from one conductor to another. An electronic connector is a motor system that can provide a separable interface to connect two secondary electronic systems. Simply put, it is used to complete interconnected components such as circuits or electronic devices, and become a connector, that is The bridge between the two. So next, the female row connector manufacturers will introduce the materials and development trends of electronic connectors.

　　The selection of materials is based on comprehensive consideration of the characteristics of processing formability, product applicability and strength; the cost of electronic connectors is affected by factors such as material price, processing difficulty and production efficiency; electronic connector materials mainly include insulating materials (plastic raw materials), Conductor material (phosphor copper, brass); commonly used engineering plastic materials for electronic connectors are: LCP, NYLON, PBT.

　　1, CP

　　It has a small linear expansion coefficient, low injection molding shrinkage, extremely outstanding strength and elastic modulus, and good heat resistance. It has a high load deformation temperature, some up to 340 degrees or more. LCP also has good resistance Chemical corrosion and air-tightness, so general connectors that require SMT are LCP materials, eg: MINIPCIEXPRESS; DDR.

　　2, NYLON

　　Low price, high tensile strength, outstanding abrasion resistance and self-permeability, good fluidity, which is conducive to thin-wall molding, but the shrinkage is serious and it is easy to produce hairs. It needs to be baked strictly before molding to prevent hydrolysis. General connectors, especially DIP, mostly use NYLON materials, eg: PCI120P; PCIEXPRESS.

　　3, PBT

　　Low price, high strength, friction resistance, but poor molding performance, serious shrinkage, low melting temperature, plastic melting easily occurs during wave soldering.

　　The development direction of electronic devices

　　1, miniaturization

　　Small size, light weight, small size, reduced height, high density/high pin number.

　　2, high frequency signal/transmission

　　Low contact resistance, low effect, good signal shielding effect, signal delay, Crosstalk... etc. effects

　　3, automatic operation

　　Reduce the station manufacturing process, Auto Pick & Place, Type, product accuracy improvement, and maintenance methods.

　　4, humanized interface

　　is user-friendly, anti-sluggish design.

　　5. Low usage fee

　　Standardized production, flexible product and process design, shorten delivery time.

Read recommendations:

M3140 2.0x6.1(1A)Quick charging spring thimble company

Electronic spring contacts M060 3.0X15.5

M3030 3.2x33.0(1A)radioactive probe factory

Some precautions when applying spring thimble

SMD connector in wire-to-board connector!Probe connector Wholesale