What do we need to pay attention to when producing Pogo pins?Connector Processor

　　1. The compression force is generally 2/3 of the total stroke. If the pressure is too small, the normal force is insufficient, and the impedance is unstable; if the pressure is too high, it will hit the nozzle and cause the needle card to fail. During the assembly process, care should also be taken to avoid touching the board mouth to avoid bumping the card material.

　　2. The battery contact points paired with the pogo pin or FPC gold finger should not be dyed or oxidized; there should be no residual sealing night; there should be no other dirt residues.

　　3. The head and nozzle of the Pogo pin should not touch the plastic barrier during the assembly process.

　　4. When designing the structure of the Pogo pin, it is necessary to communicate with the staff to understand the performance of the Pogo pin and the adaptability of the product in order to avoid unnecessary problems in the future.

Read recommendations:

M1325 5.00x8.00(5A)

M219 1.5X16

M205 2.1X9

Production of PogoPin Connector

Connector function.thimble Wholesale