Common problems of car replacement spring POGOPIN.magnetic pogo pin connector

　　1. Does replacement of short spring cause serious damage to the shock absorbers?

　　Short spring refers to the spring that is shorter than the original spring and the initial length after installation. It has strong support and high bearing capacity. The first modification is to improve the first -level control performance;

　　The short spring is designed for the original car. It can reduce the body, improve the overall beauty of the vehicle, and ensure the stability and support of the vehicle during the turning process. The size of the outer circle at both ends of the spring is the same as the original car, which is completely matched with the original car shock absorber without damage.

　　2. Why should I modify the short spring?

　　It is mainly to improve controlling. In terms of increasing hardness, it can improve the rolling suppression ability of the suspension and reduce the rolling of the body when bending. Reducing the height of the vehicle can reduce the center of gravity of the car at the same time, reduce the weight of the car body weight during turning, and improve stability. And reducing the height of the car can also take into account the aesthetic effect.

　　Third, can we reduce the price of short spring springs?

　　Compared with the same quality manufacturers, the price of Guoyang is the most favorable. One price is the same, I believe you are good at it.

　　4. Is it difficult to install short spring?

　　The reinstallation of the short spring uses the original car shock absorber. Just replace the spring directly, so it is not difficult to install a short spring. Can be installed in general maintenance workshops or modified workshops.

　　5. After modifying the short spring, how much can the body be reduced?

　　According to the actual feedback of the riders: After the short spring is installed, the distance between the tire surface and the wheel cover (that is, the mud plate) is about 2 and a half finger (about 4-5cm). The technical modification parameters of the model can only be used as a reference and cannot be used as the final basis. After all, this is a modified part. High and low gear is a normal phenomenon. The modification of cars is related to many factors, such as different years, displacement, adjustment before factory, use time, original shock absorbers, wheels, total installation, etc.

Read recommendations:

M1130 3.00x12.60(1A)

M2939 6.0X20.8(5A)Data line spring needle company

M1196 3.60x23.00(1A)

Switch probe to buy reliable products to see these three points

Spring probe (pogo pin) connector coating material!Through Hole Pogo Pin Processing